Structured cabling that lasts a decade
Cabling is the one part of your network you will not replace for ten years, which makes it the worst place to economize. We install CAT 6 for standard office deployments and CAT 6A where 10-gigabit capability, long runs or high-interference environments justify it, with plenum-rated cable where building code requires it.
Quality shows in details invisible on day one and decisive in year three: proper bend radius maintained, jacket stripped only as far as needed, pairs untwisted minimally at termination, runs kept clear of fluorescent ballasts and power conduit, and every cable certified with a tester rather than a link light. Each run is labeled identically at the jack and the patch panel, and you receive a port map document.
Rack build-outs follow the same standard: horizontal cable management, service loops, clearly labeled patch cords, appropriate ventilation and a UPS sized for a graceful shutdown. A well-built rack turns a future thirty-minute change into a five-minute change.
- CAT 6 and CAT 6A structured cabling for offices, clinics and warehouses
- Certification testing with documented results
- Patch panels, wall plates, labeling and port mapping
- Server rack build-outs, cable management and UPS installation
- Fiber runs between buildings and floors where required
- Residential CAT 6 wiring for home offices and whole-home networking
Switching, VLANs and network segmentation
A flat network — where every device can reach every other device — is convenient and dangerous. A compromised guest laptop, a vulnerable IP camera or a payment terminal on the same broadcast domain as your file server all represent unnecessary risk, and a single misbehaving device can degrade performance for everyone.
We deploy managed switches and design VLANs that reflect how traffic should actually flow: staff workstations, voice, guest Wi-Fi, cameras and building systems, and payment devices each in their own segment with firewall rules controlling what may cross between them. Quality of service prioritizes voice and video so calls stay clean under load.
Power over Ethernet from the switch feeds access points, cameras and phones, removing power adapters from ceilings and giving you the ability to remotely power-cycle a stuck device instead of sending someone up a ladder.
- Managed switch deployment with documented configuration backups
- VLAN design separating staff, guest, voice, camera and payment traffic
- PoE and PoE+ for access points, cameras and VoIP phones
- Quality of service tuning for voice and video reliability
- Link aggregation and stacking for high-throughput environments
Firewalls, VPN and multi-site connectivity
The firewall is your network's front door and it deserves more than the box your ISP supplied. We deploy business-grade firewalls with intrusion prevention, content and category filtering, geo-blocking, application control and detailed logging retained long enough to be useful during an investigation.
For organizations with more than one location, site-to-site VPN tunnels connect offices securely so shared resources, phone systems and management tools work identically everywhere. We regularly connect Central Valley locations — Manteca, Stockton, Tracy, Lathrop, Modesto — to each other and to Bay Area or Sacramento offices.
Where downtime is expensive, we add a second internet circuit from a different provider with automatic failover, and monitor both so we are aware of a degradation before your staff are. For remote workers, we replace exposed remote desktop with proper VPN or Zero Trust access.
Cameras, access control and low-voltage
Because we are already pulling cable and running PoE, camera and access control installation is a natural extension. We install IP camera systems with appropriate resolution and coverage, local network video recording with optional cloud retention, and clear remote viewing for owners and managers.
Access control replaces keys with credentials you can revoke instantly, log by person and time, and schedule by role. For clinics, warehouses and multi-tenant offices this is often both a security and an operational improvement.
All low-voltage work is coordinated with your general contractor or property manager where required, and completed to a documented standard.
- IP camera systems with NVR and remote viewing
- Door access control with credential management and audit logs
- VoIP phone cabling and handset deployment
- Conference room AV cabling and connectivity
How a network project runs
Projects begin with a site walk. We measure, review the floor plan, identify the equipment location, check existing pathways and note anything unusual — asbestos-era ceilings, tenant improvement restrictions, landlord requirements. You receive a written, fixed-price scope covering materials, labor, schedule and what is explicitly excluded.
Work is scheduled to minimize disruption, with cutovers after hours where a live environment is affected. On completion you receive as-built documentation: port maps, rack elevations, IP addressing, VLAN assignments, device credentials and warranty details.
We install across Manteca, Stockton, Tracy, Modesto, Ripon, Lodi, Sacramento and the surrounding region, for everything from a six-drop professional office to a full warehouse build-out. Request a site walk and a fixed-price quote.
Frequently asked questions
- Should we install CAT 6 or CAT 6A?
- CAT 6 handles gigabit easily and 10-gigabit over short runs, and suits most offices. CAT 6A is worth the extra cost for long runs, 10-gigabit backbones, high-density Wi-Fi 6E uplinks and electrically noisy environments.
- Do you certify and document the cabling?
- Yes. Every run is tested and certified, labeled identically at both ends, and delivered with a port map and as-built documentation.
- Can you install cabling in an occupied office?
- Yes. We schedule around your operations and perform disruptive work such as switch cutovers after hours or on weekends.
- Do you do residential network installation?
- Yes. Home CAT 6 wiring, whole-home Wi-Fi, home office drops, cameras and smart home networking are all available across the Central Valley.
- How much does a business network installation cost?
- Cost depends on drop count, cable type, distances and building construction. We provide fixed-price quotes after a site walk rather than hourly estimates.
- Can you connect multiple locations?
- Yes. Site-to-site VPN and multi-site firewall management connecting Central Valley, Sacramento and Bay Area offices is a standard service.